molten metal
英 [ˈməʊltən ˈmetl]
美 [ˈmoʊltən ˈmetl]
网络 熔融金属; 金属液
双语例句
- The molten metal is poured into the mould.
把熔化的金属倒入铸模。 - The coagulation behavior of micro sized non metallic inclusions in molten metal processed by ultrasound was analyzed and discussed.
针对超声波作用下金属液中微小非金属夹杂物的凝聚过程进行了分析研究。 - Cooling like beads of molten metal
像熔化后的金属的水珠在慢慢冷却 - The molten metal was run into a mould. Mathematical Modelling for the Shape of Metallic Bath in ESR Process
熔化的金属被倒进模内。电渣重熔过程中金属熔池形状的数学模拟 - So it is necessary for each steel making process to supply controlled amounts of oxygen to the molten metal undergoing refining.
所以任何一种炼钢方法都必须为精炼的钢水供给一定量的氧。 - Molten metal is poured into a mold cavity formed out of sand.
将熔化的金属倒入由型砂做成的铸模的型腔中。 - The blast forms a slug of molten metal that can rip through most armoured vehicles& and their occupants.
爆炸以后形成的金属嵌片可以穿破装甲车辆。 - As the molten metal cools ( minutes to days), the metal will shrink and the volume will decrease.
随着熔化金属的冷却（几分钟到几天），金属收缩体积减小。 - Overhead a fountain of molten metal arced kilometers through the air, a brilliant rainbow of fire.
头顶上一个熔化金属喷泉弧状喷射到数公里高的空中，形成一个燃烧的明亮彩虹。 - There can be some trade off between die temperature, cavity filling time and the temperature of the molten metal.
在压铸模温度、腔充填时间和金属熔化温度之间可能要做某些权衡。 - A thin golden line formed on the wall before him, running like a stream of molten metal along the horizontal until both ends dropped down and then ran back together.
在他面前，墙上出现了一道纤细的金色光线，象一股熔化的金属的溪流，沿着水平线流动，直到两端垂直流向下方，接着再一同倒流回去。 - Fettle: To line the hearth of ( a reverberatory furnace) with loose sand or ore in preparation for pouring molten metal.
涂（炉膛）：为倒入熔化的金属作准备而用松散的沙子或矿渣涂（反射炉的）炉膛。 - Discussing various influence factors of ductile iron's surface blowhole defects indicates that bringing various gases in the molten metal or on the interface with the sand mould is inevitable.
对影响球墨铸铁件皮下气孔的各种因素分析表明，铁液中气体的产生有其必然性，通过减少气体的发生量以防止皮下气孔的方法并不是都能奏效。 - Theoretical and Experimental Study on Pneumatic Diaphragm-Based Micro Molten Metal Droplet Jetting System
气动膜片式金属微滴喷射理论与实验研究 - To remove dissolved oxygen in the molten metal prior to pouring, elements have been added which have high affinity for oxygen such as titanium, vanadium, niobium and magnesium.
为了在浇铸之前消除熔化金属中的溶解氧，需要在金属中添加具有很高的氧亲合力的元素，如钛，钒，铌和镁。 - An alloy of ferromanganese is added to the molten metal as it is poured from the converter into the ladle.
人们在钢水轻炉倒进钢水桶时，放进一些锰铁合金。 - The casting to be made determines the temperature at which the molten metal should be in the holding furnace.
要制造的压铸件决定了应在保温炉中熔化的金属的温度。 - Casting: The process of forcing molten metal into a mould to create a character or slug of type. Study on Mold Filling in Magnesium Alloy EPC Process with Vacuum
浇铸：把溶解的金属挤压出，充满到字模内，铸成字粒或字条的过程。镁合金负压消失模铸造充型过程的研究 - Loose sand or ore used to line the hearth of a reverberatory furnace in preparation for pouring molten metal.
为倒入熔化的金属作准备的用来修整反射炉炉膛的松散砂子或矿渣。 - High-speed plasma arc cutting technology plasma engineering hot metal cutting, and partial melting with high flow will also be the molten metal blow, form a narrow incision.
血浆高速等离子弧切割技术工程热金属削减部分熔融，并与高流量同样会被熔化的金属吹走，形成一个狭窄的切口。 - A new method, by which weightless effect can be got by the interaction between electromagnetic force and molten metal, has been put forward in this paper.
提出了一种在地面利用电磁场与金属熔体的相互作用来模拟失重效应的方法。 - During this time molten metal may backflow from the molten risers to feed the part and maintain the same shape.
在此期间熔化金属可能从冒口回流供给零件以保持其形状不变。 - The basic function of Casting Machine is casting molten metal into solid metal featured by specific shape and required weight.
浇铸机最基本的功能是将经冶炼后的熔融状态的金属浇铸成具有特定形状规格和重量要求的固态金属。 - The molten metal may enter the ingot mould in two ways: from the top and from the bottom.
钢液注入钢锭模可采用两种方式：上注和下注。 - Casting is a manufacturing process in which molten metal is poured or injected and allowed to solidify in a suitably shaped mold cavity.
铸造是一种将熔化的金属倒入或注入合适的铸模腔并且在其中固化的制造工艺。 - ( of molten metal or glass) formed by pouring or pressing into a mold.
（指金属或玻璃熔铸的）倒入或压入模子中使之成型。 - Pour molten metal into a mold of sand.
将熔化的钢铁灌进模子中。 - The molten metal was run into a mould.
熔化的金属被倒进模内。 - The molten metal is centrifugally thrown towards the inside mold wall, where it solidifies after cooling.
受离心力作用熔化金属被抛向型模的内壁，在那里冷却后固化。 - The study of the interaction of magnetic fields and electrically conducting fluids ( as plasma or molten metal).
对磁场和电导液体（如血浆或熔化金属）的交互作用的研究。